Equipment, Supplies, and Training for the Professional Refinisher

NAPCO Ltd
Autumn Blaze Flint-Stone Gallon #7219
SKU: FLNT.STN.AUTM.G

More Views

$69.00

Availability: In stock

Autumn Blaze Flint-Stone II, Gallon #7219
FLINT-STONE II
Autumn Blaze
Instructions: This 1-part system does not require reduction. Shake contents well before use, as solids will settle. If reduction is necessary, add water in small increments (no more than 1-2 ounces of water per quart of Flint-Stone II at a time). If stored for a long period of time, product may skin over. Remove the skin before use
DANGER! HARMFUL OR FATAL IF SWALLOWED.
FLAMMABLE LIQUID AND VAPOR.
VAPOR AND SPRAY MIST HARMFUL.
Do not breathe spray mist. Use with adequate ventilation. Wear respiratory protection (NIOSH/MSHA approved respirator). Close container after each use. Avoid contact with eyes or skin, as it will cause irritation. If swallowed, induce vomiting and seek medical attention. For chemical or medical emergencies, call 1-800-457-4280. For further information, refer to the Material Safety Data Sheet.
KEEP OUT OF REACH OF CHILDREN
FOR INDUSTRIAL USE ONLY!

Warning: Do not store below 32°F as product may freeze.
Suggested Use: For interior use on kitchen counters, bathroom vanities, bathtubs, wood cabinets or walls.
Preparation Clean surface and repair any imperfections. Etch and prime porcelain and ceramic surfaces. Primer is not needed for laminate counters, vanities, or any type of plastic type surfaces (plastic, fiberglass, acrylic, laminate, cultured marble, etc). - just clean and sand with 80 grit wet/dry sandpaper. Unprimed wood and drywall are absorbent and will require extra coats. Not using primer on dark colored surfaces may alter the look of the Flint-Stone color, as NAPCO color samples are sprayed on a white background.
Application: Hold spray gun at a consistently uniform distance, approximately 6-8" equipment and distance if necessary to obtain desired results. Aim the spray gun directly at the surface, as spraying at an angle will distort the pattern. Spray horizontal strokes, over-lapping each previous pass by half. For horizontal surfaces, immediately spray the second coat. For vertical surfaces, wait 5 minutes between coats. Crosshatch the spray pattern on the second coat with vertical strokes to eliminate any overlap marks. Under normal conditions, clear coat with Poly-Glass low or high gloss in 4-5 hours. If using a fan to blow air across the surface, you may be able to clear coat in as little as 1 hour. Wait 24 hours after clear coating for light use, 48 hours for normal use. LIMITED WARRANTY: The Manufacturer warrants only that the product shall meet its specifications. This warranty is in lieu of all other written or unwritten, expressed or implied warranties and the Manufacturer expressly disclaims any warranty of merchantability, or fitness for a particular purpose. The buyer assumes all risks whatsoever as to the use of the material. In order to determine that the color is correct, you should apply this product to an inconspicuous area of the surface on which it is to be used and allow it to dry. Buyer's exclusive remedy as to any breach of warranty, negligence, or other claims shall be limited to the replacement of the material. Failure to strictly adhere to the recommended procedure shall release the Manufacturer with respect to the material or use thereof.
Select a product to view its label View Product Label
Description

Details

Autumn Blaze Flint-Stone II, Gallon #7219
Additional Information

Additional Information

Weight 9.2400
Size Gallon
Color Autumn Blaze

No additional information available.