HIGH GLOSS RESIN
This is a 2 component Aliphatic Acrylic Polyurethane Resin.
Mix 2 parts Mega-Fast Resin with 1 part Universal Catalyst. For the average
sized bathtub (or 35 square foot surface), mix 10 oz. of Mega-Fast Resin
with 5 oz. Universal Catalyst (by volume). Thin with 5 to 7 oz. of All Purpose
Thinner. Spray 1 light tack coat followed by 2 wet coats. Pause between
coats to inspect work. Dries to the touch in 5 to 15 minutes with normal
humidity and temperature. Remove masking paper and apply caulk in 15
to 30 minutes. Air cured, water resistant in 4 hours at 75° F.
HARMFUL OR FATAL IF SWALLOWED.
FLAMMABLE LIQUID AND VAPOR.
VAPOR AND SPRAY MIST HARMFUL.
May affect the brain and nervous system causing dizziness, headache, or nausea. Causes eye, skin, nose, throat, and lung irritation.
STORE INDOORS BETWEEN 50-90°F
Shake constantly for 15 - 30 seconds before using.
NAPCO, Ltd. 7315 Hamlin, Skokie, IL 60076 (800) 888-1081
Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling contents may be harmful or fatal.
INDIVIDUALS WITH LUNG OR BREATHING PROBLEMS MUST NOT
BE EXPOSED TO VAPOR OR SPRAY MIST
Do not breathe vapor or spray mist. Use only with adequate ventilation. Wear an appropriate, properly fitted respirator (NIOSH/MSHA approved) during and after application unless air monitoring demonstrates vapor/mist levels are below applicable limits. An airline respirator (TC 19C NIOSH/MSHA) is recommended. A vapor/particulate respirator (TC 23C NIOSH/MSHA) may be appropriate where airborne monitoring demonstrates vapor levels below ten times the applicable exposure limits. Follow respirator manufacturer's directions for respirator use. Do not get in eyes, on skin, or on clothing. Wash thoroughly after handling. Keep away from heat, sparks, and flames. Vapor may cause flash fire. Do not smoke. Extinguish
all flames and pilot lights, and turn off stoves, heaters, electric motors, and other sources of ignition during use and until all vapors are gone. Keep container closed when not in use. In case of spillage, absorb with inert material and dispose of in accordance with applicable regulations. The contents of this package may be blended with other components before the product can be used. Any mixture of components will have the hazards of all components. Before opening the packages, read all warning labels. Follow all precautions.
If affected by inhalation of vapor or spray mist, remove to fresh air. If breathing difficulty persists or occurs later, consult a physician and have label information available. In case of eye contact, flush immediately with plenty of water for at least 15 minutes and
get medical attention; for skin, wash thoroughly with soap and water. If swallowed, get medical attention immediately. Do not induce vomiting. For chemical or medical emergencies call 1-800-457-4280. Outside of the U.S. or Canada call 1-352-323-3500.
For further information, refer to the Material Safety Data Sheet.
KEEP OUT OF REACH OF CHILDREN
FOR INDUSTRIAL USE ONLY!
The Manufacturer warrants only that the product shall meet its
specifications. This warranty is in lieu of all other written or unwritten, expressed or implied
warranties and the Manufacturer expressly disclaims any warranty of merchantability, or
fitness for a particular purpose. The buyer assumes all risks whatsoever as to the use of the
material. In order to determine that the color is correct, you should apply this product to an
inconspicuous area of the surface on which it is to be used and allow it to dry.
Buyer's exclusive remedy as to any breach of warranty, negligence, or other claims shall be
limited to the replacement of the material. Failure to strictly adhere to the recommended
procedure shall release the Manufacturer with respect to the material or use thereof.