Conventional topcoats were developed in the 1950's--the same time as TV dinners! PolyGlass 320 is an eco-friendly topcoat that meets the federal guidelines for low VOC's. It offers all the benefits of earlier coatings but with low VOCs. This also means the odor is greatly reduced. Better for you, better for your customers, better for your business. Easy to use. Finish is just as hard as or harder than conventional coatings. Safer for you and your customers.
Use this catalyst with either 320 high-gloss or 320 low-gloss resins.

Need a more durable finish? Try the 320 Stain-No-More Catalyst:
Ensure the hardest surface with the best abrasion, mar and impact resistance available. This heavy-duty catalyst repeatedly helps repel coffee, ketchup, mustard, juice and food stains. It even helps guard against cigarette burns. This catalyst is great for kitchen counters and vanities that tend to attract stains. It works well on a wide variety of materials including bathtubs, Formica, plastic, cultured marble and ceramic tile.

Laboratory Data --- Typical Properties
Appearance --- Clear Liquid
Flash Point --- 39°F
VOC (including water and exempt solvents) --- 2.44 lbs/gal
VOC (excluding water and exempt solvents) --- 2.97 lbs/gal

320 Catalyst Application:
For the average size bathtub (35 square foot surface), mix 10 oz. of PolyGlass 320 resin with 5 oz. of the 320 Catalyst (by volume). Thin with 5 oz. of the 320 Reducer to spray apply. Spray 1 light tack coat followed by 2 wet coats. Pause between coats to inspect the work. Allow the coating to “tack’ before applying the next coat. At 75F and 50% humidity, PolyGlass 320 will dry to touch in eight minutes. Remove masking paper and apply caulk in 30-45 minutes after the last coat is applied.