Gorilla Grip

Save time, headaches and make more money!
5 minutes with Gorilla Grip 1 Step Primer replaces 1 hour of prep

It's easy money
NAPCO's Gorilla Grip wipe on primer is revolutionary. Simply clean the tub with our Poly-Cleaner, rinse and dry the tub, wipe on Gorilla Grip primer and save an hour or more of tough prep work on every job. It's that simple.
Imagine an extra $250 in your pocket each and every day! Use our new 1 step primer and save 1 hour on each tub. That’s enough to do one more tub per day and means more cash for you.
NO ETCHING
NO SANDING
NO SPRAYING PRIMER
NO CLEANING GUN AFTER PRIMING
NO KIDDING!

---

APPLICATION:
NAPCO Gorilla Grip™ is a 1-step wipe-on primer and bonding agent for unpainted porcelain, ceramic, plastic, acrylic, and fiberglass tubs and tile. Prior to first use, remove safety tab and replace cap securely, making sure not to introduce any foreign matter into the can. Using NAPCO Poly-Clean Tub & Tile Prep prior to application is essential for achieving a good bond. Thoroughly dry the surface, then apply Gorilla Grip™ in small sections. Drip Gorilla Grip™ on surface and spread with applicator towel, move to next section and repeat until surface is completely covered. Close container immediately after use and discard applicator rag. Apply topcoat once surface is dry – 10 minutes for normal room temperature and humidity; longer when temperature is lower than 65°F. Do not exceed a 30 minute wait time prior to spraying topcoat or you must reapply Gorilla Grip™.

WARNING: This product can expose you to Proprietary Hydrocarbon and Proprietary alcohol, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.