Our On The Spot Gun Cleaner is perfect to use to both clean multiple surfaces and your gun. It works almost immediately due to its formulation of effective, powerful solvents without the use of methylene chloride. Hard surfaces like marble, tile, porcelain, or glass can be cleaned instantly with On The Spot. It is especially efficient in cleaning overspray from these surfaces. Additionally, any silicone contamination present on surfaces is easily removed using On The Spot and you can use it to clean your spray system of any residual paint.
Be safer by using our new methylene chloride-free On The Spot Gun Cleaner! Make sure to use at
least a cartridge respirator with organic vapor cartridges installed.
Suggested Gun Cleaning Tips:
Make sure to use at least a cartridge respirator with organic vapor cartridges installed.
As soon as you finish your job, pour out any unused resin from the cup.
Add 4oz-6oz of our On The Spot Gun Cleaner
into the cup.
Shake well to distribute cleaner inside cup.
Spray cleaner through on all settings until cup is empty.
Repeat steps 3-5 as necessary until liquid runs clear.
Wipe out cup with lint-free rag or towel and let air dry.
For SDS please see our Products Sheet page
WARNING: This product can expose you to Toluene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.